Good Morning all! I am thrilled to have a video tutorial on Hot Glue Embossing going live today at Split Coast Stampers. You can check it out here.
A couple of years ago I created this card for a challenge. I loved the way the hot glue created dimension and interest. You can check out that post here.
After being asked to be a guest tutorial author for SCS I played around some more with my hot glue gun and came up with a few more ways of creating designs with the glue.
Tip - Try out different ways of working with the glue, using different embossing powders and different combinations of re-inkers on scrap paper.
For the card above I sprinkled gold glitter about 3/4 of the way through heat embossing, unfortunately you can't really see it in this photo (did not have proper lighting for this shot), but it does give a wonderful effect. The art panel on this card was made by the drizzling the glue. When you add the re-inkers the colours tend to stay within the confines of the pattern spaces.
Here are a few more sample panels that have yet to be made into cards.
Supplies: Watercolour paper, hot glue, embossing powder, re-inkers
OK, so I had way too much fun creating this next card. My first submission for the Papertrey Ink's June Blog Hop Challenge was a little more traditional, you can view it here. I was playing around with my glue gun, embossing powder and re-inkers and came up with this.
*** I have replaced my original video tutorial with a link to a new tutorial that I created for Split Coast Stampers. You can view that video here***
I used sketch #33 at CAS(E) this Sketch for my card design. To apply the glue to this panel, simply start to apply the glue to the paper and pull the glue gun down into the pattern that you want, dragging the glue with it. The glue in the bottom left corner was simply dropped onto the paper.
Supplies - Standard A2 size
Stamp - Botanical Silhouettes (PTI)
Ink - Memento Tuxedo Black, Re-inkers - Honey, New England Ivy, Twilight (CTMH)
Paper - White Daisy CS (CTMH), watercolour paper (90 lb)
Other - glue gun, gold Embossing Powder (CTMH), spray bottle, paint brush
Hello all. It has been some time since I have posted here. Life has been pretty busy, so I haven't had as much opportunity to craft as I would like. In my last post I showed you how I made paper roses using CTMH's exclusive Cricut cartridge - Art Philosophy. Today, I would like to show you how I made the little cardstock roses on the card below.
As I mention in my video, this is not my original idea. I watched a couple of You Tube videos on how to make Prima Fairytale Roses using a punch from EK Success. I created this video to show you how you can make these roses using one of the images found on our Cricut cartridge.
The new Cricut Art Philosophy cartridge has some great cut images for creating 3-D spiral flowers. However, for these roses I used a different method. I created the three larger roses on this card using the 'Flower3' image on the cartridge. These roses are similar to the roses that I have been making for years that are completely hand cut. You can find a tutorial for them here.
I love how this card turned out. You can find out how I colored the seam binding here. Love the new 'Thanks' stamp set - very elegant. I cut the Grey Wool circle at 3 1/4", the Colonial White circle at 3".
Please see my video tutorial below to see how I put the roses together. I love the little knock-off Prima fairytale roses also and hope to put together another tutorial next week. You can learn how to make these by going to You Tube and searching for Prima Fairytale roses. After watching a couple of these videos I came up with a method that is basically the same with a few minor differences.
Supplies: Card size is 5" x 5" - All products are CTMH except where noted
Paper - Lucy B&T, Colonial White, Olive and Grey Wool cardstock
Stamps - Thanks -A1125
Ink - Jet Black Staz-On, Grey Wool, Creme Brulee, Olive, Tulip, Cotton Candy, Cotton Candy re-inker
Accessories - Color Ready Seam Binding, Pearl Opaques, Bitty Pearl Opaques
Other - Cricut Art Philosophy, craft knife, 1/2" flower punch (EK Success), 3D foam, rubbing alcohol, heat gun
Love the new Cricut cartridge - Art Philosophy - from Close To My Heart. There are five awesome cuts on the cartridge for making 3D rose-like flowers, but you can also make some great flowers from some of the petal shapes. Here are a couple of very simple 3" x 3" cards that I quickly made to showcase the flowers.
The six petal flower above was made using six of 'Petal 1' cut at 1 1/4" and one base 'flower 7' cut at 3/4"
The seven petal flower above was made using seven of 'Petal 2' cut at 1 1/4" and one base 'Flower 6' cut at 3/4"
Check out the video below for details on how I put these flowers together.
Supplies - Cards are 3" x 3" - All supplies CTMH
Paper - Pemberly B&T, Colonial White & Indian Corn Blue cardstock
Stamp - Thank You
Ink - Outdoor Denim, Creme Brulee
Accessories - Opaque Pearls
Other - Cricut Art Philoshophy cartridge
I created this card for my parents 64th wedding anniversary this year. The paper used is from one of the new paper packs being offered in the Spring/Summer 2012 CTMH Idea Book. I love the soft colours in this paper pack and some of the great new embellishments available to go with it.
I was really excited to see the Color Ready Seam Binding now available. I love wrinkled seam binding bows on cards. I have been playing around a bit with different methods to color the seam binding and have created a short video tutorial (see below). I will probably only use this on cards for the time being until I can verify the permanence of the dye on the seam binding. (I colored another brand of seam binding some months ago with water and reinker and found that over time the color migrated from the ribbon onto the card - not what I would want to have happen to a layout).
Supplies - Sketch from Originals - Message Enclosure - Card size is 6 1/2" x 4 3/4" (so it can fit into one of my clear boxes)
Paper - Florentine B&T, Cocoa, Black and Colonial White CS
Stamps - Family Love - D1506, Love Always - D1337 (for inside sentiment)
Ink - Cocoa, Twilight, Garden Green re-inker
Accessories - Color Ready Seam Binding, Timeless Charms, Bohemian Assortment, Mocha Opaques and Black Waxy Flax
Other - rubbing alcohol, spray pen, heat gun, 3D foam, corner rounder
As soon as I saw the Roxie paper pack in the new Fall/Winter Idea Book from Close To My Heart, I knew I wanted to make a birthday card with it. This card actually turned out as I envisioned it (this doesn't always happen).
All products used on the card are CTMH except the little feather. I have created a video to show how I created the fan, rose and the altered embellishments. Check it out below. You can view my original Paper Rose Tutorial here.
*** Just a quick note - In the video I explain how I made the fan - after folding and adding liquid glass between each pleat I wrapped a rubber band around the end to hold it together just until the liquid glass dries - *** Remove the rubber band when dry ***
Supplies - All products are CTMH except where noted - Card size is 4 3/4" x 6 1/2"
Paper - Designer Paper - Roxie, Vanilla Cream, Black, Juniper cardstock
Stamps - Picture Perfect (D1363), Birthday Script (B1208)
Ink - Jet Black (Staz-On), Desert Sand, Smoothie, Juniper
Accessories - Pin - Bling Assortment, Charm - Heirloom Assortment, Rhinestone Designer Brads, Sparkles, Color Ready Kraft Borders, Black Organday Ribbon, feather (dollar store)
Other - liquid glass, fine wire, 3D foam, Spellbinders Labels 10 & Plain Oval
Making hand cut paper flowers isn't new, but I thought I would share with you some of the flowers I have made lately.
I absolutely love how this Sympathy card turned out. The flowers are meant to be Florida Clematis. The flowers were made using good quality copy paper for the petals and printed paper from the retired paper pack Paper Garden.
Check out the video below to see how I made these flowers. For the flower centers please refer to my video tutorial 'Button Carnations' and for the leaves check out my picture tutorial 'Paper Roses'.
Paper sizes for flowers -
Large clematis - 1 - 3" x 3" white copy paper
1 - 1" x 6" designer paper for center
Small clematis - 1 - 2" x 2" white copy paper
1 - 5/8" x 6" designer paper for center
Supplies - All CTMH except where noted - card size is 7" x 5"
Paper - Good quality white copy paper, White Daisy, Ponderosa Pine and Gypsy cardstock, Designer paper - Paper Garden (retired)
Stamps - Card Chatter - Sympathy
Ink - Black, Hydrangea (retired), Grey Wool, Ponderosa Pine, C1 - Copic Marker
Accessories - black brads
Other - Embossing Folder (Provo-Craft), embossing stylus
Here is another 6 petalled flower I made using paper from the paper pack Magnifique
Paper sizes for Magnifique flower -
1 - 2" x 2" multi print
1 - 1 3/4" x 1 3/4" - peacock feather print
1 - 1 1/2" x 1 1/2" - peacock feather print
Eight Petalled Paper Flowers
Below I have another video tutorial for creating 8 petalled hand cut flowers.
Paper Sizes for pink flower -
2 - 2" x 2"
2 - 1 3/4" x 1 3/4"
2 - 1 1/2" x 1 1/2"
Paper sizes for 'Wings' flower -
Large - 1 - 2" x 2" - black print (Wings)
1 - 2" x 2" - pink print (Unforgettable - retired)
1 - 1 1/2" x 1 1/2" - black print (Wings)
Small - 1 - 1 1/4" x 1 1/4" - black print
1 - 1" x 1" - pink print
1 - 1" x 1" - black print
Paper sizes for Black Eyed Susans -
Large - 2 - 3" x 3" - sunflower print - (Magic Moments - retired)
1 - 1" x 9" - cocoa print - (Magic Moments - retired)for center
Small - 2 - 2" x 2" - sunflower print - (Magic Moments - retired)
1 - 5/8" x 6" - cocoa print - (Magic Moments - retired)for center
(can use 3/4" x 6" for center)
I hope you enjoyed these video tutorials. By altering the shape of the petals, the number of layers, the papers for each layer and what you choose for the flower centers you can create an endless variety of flowers. Try glitter, heat embossing etc. for even more variety.
This week's Heart 2 Heart challenge is to share your favourite technique in a project. If you have been following my blog you know that I am pretty much into flowers of all kinds, so it should come as no surprise that the technique I want to share with you today is a new flower that I have been working on. This flower reminds me of little button carnations and they are so simple to make. Please watch the video below for instructions. (The quality of my video isn't the greatest this time - I don't think my camera liked the grid pattern on my craft mat and was changing focus quite a bit, but you should be able to follow it well enough).
Here is the video tutorial for the Sunflower that I used on my Mojo Monday card yesterday. It comes to an abrupt end because I had to cut the last few seconds off that took me over the 15 minute limit.
I visited a website called Wild Orchid Crafts about a week ago and saw this great little video on how to make these little carnations with flat paper flowers. When I went back to link to it, the video was replaced with another one by a different designer. Unfortunately, I did not take note of the name the first time since I assumed that it was an in-house designer and that I would be able to get back to the video. If anyone knows who did this video please let me know so that I can give credit. With no link I decided to make my own little tutorial (see post below). Hope you enjoy!
WARNING: These flowers are highly addictive. I find that I want to glue all of my flowers together to make them.
